FOSSER Drive Turbo Plus LA 10W-30
Sicherheitsdatenblatt:
Download
High-performance low-friction engine oil for low-emission engines
Properties
Fosser Drive Turbo Plus LA 10W-30 is an all-season high-performance engine oil for low-emission engines. Exhaust gas turbocharging and intercooling place significantly higher mechanical and thermal demands on engine oils. These tougher operating conditions are reliably handled even with extended oil retention times. A reliable cold start at low outside temperatures and full lubrication at high operating temperatures are ensured.
Application
Fosser Drive Turbo Plus LA 10W-30 is used especially in highly stressed Euro IV, Euro V and Euro VI commercial vehicle engines with
exhaust gas aftertreatment. In addition, it can be used in commercial vehicle and passenger car diesel engines with and without turbocharging, as well as in gasoline engines (mixed fleet). Engine oils of this performance category are recommended for extended oil change intervals.
Specifications: ACEA E6/E7/E9, API CK-4/SN
Recommendation*: Caterpillar ECF-3 / ECF-2 / ECF-1, Cummins CES 20086 / 20081, DDC 93K222 / 99K218, Deutz DQC IV-10LA, Mack EOS-4.5, MAN M 3477 / 3575 / 3275, DTFR 15C110 (228.51), DTFR 15C100 (228.31), MTU Type 3.1, Renault VI RLD-4, Volvo VDS-4.5 / VDS-4
| TYPICAL CHARACTERISTICS | METHOD | UNITS | FOSSER Drive Turbo plus LA 10W30 |
| Density at 15°C | DIN 51 757 | kg/m³ | 855 |
| Viscosity at 40°C | DIN 51562 | mm²/s | 78.9 |
| Viscosity at 100°C | DIN 51562 | mm²/s | 12.2 |
| Viscosity index (VI) | DIN ISO 2909 | – | 151 |
| Viscosity at -25°C | ASTM D 5293 | mPa·s | 5070 |
| Pour point | ASTM D 7346 | °C | -39 |
| Flash point COC | DIN ISO 2592 | °C | 242 |
| TBN | ASTM D 2896 | mg KOH/g | 9.4 |
The values given may vary within the usual commercial range.
* corresponds to the requirements of the OEM manufacturer.
- Free shipping for orders over EUR 49.00; otherwise, a shipping fee of EUR 4.90 will be charged.
- Your order will be delivered by DHL within 1-3 days.